AQUANEAT Submersible Water Pump, 80GPH Fountain Pump, Small Water Pump, Aquarium Pump for Fish Tank, Outdoor Water Fountain, Hydroponics, Pond

This submersible water pump is great for fresh/salt water aquarium, indoor and outside fountains, spout and hydroponic systems.
FEATUREs:
Adjustable water Drift rate
No need any tools to detach it, easy to separate, easy to clean
Good for a return pump in an aquarium sump
Makes fish tank water changes a breeze
Increase circulation in the reservoir of a hydroponics setup
Suction cup mounting feet for either vertical or horizontal mounting
SPECIFICATION:
Max Drift Rate: 80 GPH (300L/H)
Really useful H-Max (Lift height): 1 foot
Voltage: 110 – 120 V @ 60 Hz
Length of power cord: 6 feet
Outlet: Fits 5/16, 1/2 inch ID (inside diameter) tubing
DIMENSION: 2”x1.75”x1.25“ (L x W x H)
INCLUDES:
(1) Pump
(2) Outlet adapters
Note:
1. Prohibit no-load running. Put the pump into water first before connecting power supply and ensure the pump Should be completely submersed under water. It would shorten its lifespan and lead to making loud noises when running in the air for long time.
2. Please clean it steadily in case of debris blockage, the pump would make noises or stop working if blocked by debris.
3. The maximum Drift rate is 80 GPH, there might be a plus-minus tolerance. Every additional foot of pipe, valve and turn will reduce the Drift rate a little bit. If the water sprays out the container, the Drift rate would also less than 80 GPH
4. 2′ lift height refers back to the height the pump can lift water to at the minimum Drift rate. At the stable and constant Drift rate, the pump can lift water to about 1′ height.

Adjustable Drift rate: With a keep watch over knob, the maximal Drift rate may also be up to 80GPH(300L/H); Recommend maximum lift height: 1 foot. The maximum water Drift 80GPH means the biggest Drift rate without the usage of a water pipe or without pumping water to any elevation. Every additional inch of the pipe reduces the Drift rate a little bit.
Optional 2 outlets: Fits 5/16″or 1/2″ID (inside diameter) tubing.
Dimension: 2″ x1.75″ x1.25″(L x W x H), mini size, easy to hide or disguise; Length of power cord: 6 feet
Wide application: Perfect for water fountains, pet fountain, aquariums, table fountains, waterfalls, hydroponic systems, irrigation systems and to be used in any other water features.
Note: Should be completely submersed under water. Please clean it steadily in case of debris blockage, the pump would make noises or stop working if blocked by debris.